Effects of SEBS-g-MA copolymer on non-isothermal crystallization kinetics of polypropylene

The non-isothermal crystallization kinetics of pure PP and PP/SEBS-g-MA blends up to volume fraction, Φ _d (0–0.50) was studied by differential scanning calorimetry at four different cooling rates. Crystallization parameters were analyzed by Ozawa and Liu models. The Ozawa model fits in the PP/SEBS-g-MA blends and indicates the effect of SEBS-g-MA copolymer on the crystallization process of polypropylene. Augis–Bennet model has been used to calculate activation energy, ?E, during non-isothermal crystallization process. The value of ?E decreased with SEBS-g-MA due to flexibility of SEBS-g-MA by which movements of chains of PP become easier.     

Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates

Hemp fibre‐reinforced polycaprolactone (HFRP) composite has inherent good mechanical properties and benefits which include remarkably high specific strength and modulus, low density, and renewability. No doubt, these properties have attracted wider applications of HFRP composite in engineering applications. This paper presents an investigation on the influence of drilling parameters and fibre aspect ratios, AR (0, 19, 26, 30, and 38) on delamination damage factor and surface roughness of HFRP composite laminates utilising high speed steel twist drills under dry machining condition. Taguchi's technique was used in the design of experiment. The results obtained show that increase in cutting speed reduces delamination factor and surface roughness of drilled holes, whereas increase in feed rate causes increase in both delamination factor and surface roughness. Feed rate and cutting speed had the greatest influence on delamination and surface roughness respectively when compared with aspect ratio, while an increase in fibre aspect ratios leads to a significant increase in both delamination factor and surface roughness. The optimum results occurred at cutting speed and feed rate (drilling parameters) of 20 mm/min and 0.10 mm/rev, respectively, when drilling sample of AR 19. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42879.     

Erosion behavior of SiC–WC composites

Dense silicon carbide (SiC) ceramics were prepared with 0, 10, 30 or 50 wt% WC particles by hot pressing powder mixtures of SiC, WC and oxide additives at 1800 °C for 1 h under a pressure of 40 MPa in an Ar atmosphere. Effects of alumina or SiC erodent particles and the WC content on the erosion performance of sintered SiC–WC composites were assessed. Microstructures of the sintered composites consisted of WC particles distributed in the equi-axed grain structure of SiC. Fracture surfaces showed a mixed mode of fracture, with a large extent of transgranular fracture observed in SiC ceramics prepared with 30 wt% WC. Crack bridging by WC enhanced toughening of the SiC ceramics. A maximum fracture toughness of 6.7 MPa*m^1/2 was observed for the SiC ceramics with 50 wt% WC, whereas a high hardness of 26 GPa was obtained for the SiC ceramics with 30 wt% WC. When eroded at normal incidence, two orders of magnitude less erosion occurred when SiC–WC composites were eroded by alumina particles than that eroded by SiC particles. The erosion rate of the composites increased with increasing angle of SiC particle impingement from 30° to 90°, and decreased with WC reinforcement up to 30 wt%. A minimum erosion wear rate of 6.6 mm³/kg was obtained for SiC–30 wt% WC composites. Effects of mechanical properties and microstructure on erosion of the sintered SiC–WC composites are discussed, and the dominant wear mechanisms are also elucidated.     

CRIM’s content-based audio copy detection system for TRECVID 2009

We report results on audio copy detection for TRECVID 2009 copy detection task. This task involves searching for transformed audio queries in over 385?h of test audio. The queries were transformed in seven different ways, three of them involved mixing unrelated speech to the original query, making it a much more difficult task. We give results with two different audio fingerprints and show that mapping each test frame to the nearest query frame (nearest-neighbor fingerprint) results in robust audio copy detection. The most difficult task in TRECVID 2009 was to detect audio copies using predetermined thresholds computed from 2008 data. We show that the nearest-neighbor fingerprints were robust to even this task and gave actual minimal normalized detection cost rate (NDCR) of around 0.06 for all the transformations. These results are close to those obtained by using the optimal threshold for each transform. This result shows the robustness of the nearest-neighbor fingerprints. These nearest-neighbor fingerprints can be efficiently computed on a graphics processing unit, leading to a very fast search.     

Coal dust alters β-naphthoflavone-induced aryl hydrocarbon receptor nuclear translocation in alveolar type II cells

Background  

Many polycyclic aromatic hydrocarbons (PAHs) can cause DNA adducts and initiate carcinogenesis. Mixed exposures to coal dust (CD) and PAHs are common in occupational settings. In the CD and PAH-exposed lung, CD increases apoptosis and causes alveolar type II (AT-II) cell hyperplasia but reduces CYP1A1 induction. Inflammation, but not apoptosis, appears etiologically associated with reduced CYP1A1 induction in this mixed exposure model. Many AT-II cells in the CD-exposed lungs have no detectable CYP1A1 induction after PAH exposure. Although AT-II cells are a small subfraction of lung cells, they are believed to be a potential progenitor cell for some lung cancers. Because CYP1A1 is induced via ligand-mediated nuclear translocation of the aryl hydrocarbon receptor (AhR), we investigated the effect of CD on PAH-induced nuclear translocation of AhR in AT-II cells isolated from in vivo-exposed rats. Rats received CD or vehicle (saline) by intratracheal (IT) instillation. Three days before sacrifice, half of the rats in each group started daily intraperitoneal injections of the PAH, β-naphthoflavone (BNF).     

Energy-efficient cooking methods

Energy-efficient new cooking techniques have been developed in this research. Using a stove with 649?±?20 W of power, the minimum heat, specific heat of transformation, and on-stove time required to completely cook 1 kg of dry beans (with water and other ingredients) and 1 kg of raw potato are found to be: 710 (±24)?kJ, 613 (±20)?kJ, and 1,144?±?10 s, respectively, for beans and 287?±?12 kJ, 200?±?9 kJ, and 466?±?10 s for Irish potato. Extensive researches show that these figures are, to date, the lowest amount of heat ever used to cook beans and potato and less than half the energy used in conventional cooking with a pressure cooker. The efficiency of the stove was estimated to be 52.5?±?2 %. Discussion is made to further improve the efficiency in cooking with normal stove and solar cooker and to save food nutrients further. Our method of cooking when applied globally is expected to contribute to the clean development management (CDM) potential. The approximate values of the minimum and maximum CDM potentials are estimated to be 7.5?×?10¹¹ and 2.2?×?10¹³?kg of carbon credit annually. The precise estimation CDM potential of our cooking method will be reported later.     

Robust and minimum norm partial quadratic eigenvalue assignment in vibrating systems: A new optimization approach

The partial quadratic eigenvalue assignment problem (PQEVAP) concerns reassigning a few undesired eigenvalues of a quadratic matrix pencil to suitably chosen locations and keeping the other large number of eigenvalues and eigenvectors unchanged (no spill-over). The problem naturally arises in controlling dangerous vibrations in structures by means of active feedback control design. For practical viability, the design must be robust, which requires that the norms of the feedback matrices and the condition number of the closed-loop eigenvectors are as small as possible. The problem of computing feedback matrices that satisfy the above two practical requirements is known as the Robust Partial Quadratic Eigenvalue Assignment Problem (RPQEVAP). In this paper, we formulate the RPQEVAP as an unconstrained minimization problem with the cost function involving the condition number of the closed-loop eigenvector matrix and two feedback norms. Since only a small number of eigenvalues of the open-loop quadratic pencil are computable using the state-of-the-art matrix computational techniques and/or measurable in a vibration laboratory, it is imperative that the problem is solved using these small number of eigenvalues and the corresponding eigenvectors. To this end, a class of the feedback matrices are obtained in parametric form, parameterized by a single parametric matrix, and the cost function and the required gradient formulas for the optimization problem are developed in terms of the small number of eigenvalues that are reassigned and their corresponding eigenvectors. The problem is solved directly in quadratic setting without transforming it to a standard first-order control problem and most importantly, the significant “no spill-over property” of the closed-loop eigenvalues and eigenvectors is established by means of a mathematical result. These features make the proposed method practically applicable even for very large structures. Results on numerical experiments show that the proposed method considerably reduces both feedback norms and the sensitivity of the closed-loop eigenvalues. A study on robustness of the system responses of the method under small perturbations show that the responses of the perturbed closed-loop system are compatible with perturbations.     

Nutritional status of rural women in relation to their participation in mixed farming in the Tafresh area of Iran

This study was conducted in the Tafresh area of Iran to assess the dietary patterns, time allocation, and nutritional status of rural women in relation to their participation in mixed farming activities. We selected 75 women from 40 villages by applying a stratified random-sampling technique. Cereals and grains were the major source of energy intake. According to the recommended dietary allowance (RDA) tables of India, the United States, the United Kingdom, and the Food and Agriculture Organization (FAO), the respondents seemed to have no micronutrient and energy deficiencies during the spring season. They spent most of their time and energy on household, animal husbandry, and crop farming activities. According to measurements of body mass index (BMI), the respondents were well nourished. However, despite the high level of BMI, analysis suggested a negative energy balance. Nevertheless, analysis indicated that rural women with negative energy balance spent more time and energy in mixed farming and had a higher level of participation in related activities. Hence, it is evident from the results that the physical contribution of rural women in mixed farming activities has a detrimental effect on their nutritional status, at least during some parts of the year (e.g., spring or summer). Therefore, there is a need to adjust nutritional interventions to improve the sustainability of their food intake and to develop appropriate technologies in mixed farming to alleviate their work burdens.